Videos - The Coin Bot

Jump to This Time	Transcription Text
00:00:00	I exported my 3D model from freecad as an STL file and sent it to the bamboo slicer for 3D printing and almost immediately I started to have problems with first layer adhesion and I was pretty disappointed
00:00:12	my first thought was that if bamboo Labs thinks a glue stick is the answer to first layer adhesion I'll just try to add more of that to the build plate but that only seemed to make the issue worse I then tried everything listed on the
00:00:25	bamboo Labs Wiki regarding first layer adhesion issues including cleaning the bed checking the build plate and filament temperatures adjusting the part Cooling and finally adjusting the thickness of the first layer
00:00:39	the theory is that a thicker first layer would stick better to the build plate but even after all that I continued to have problems but then I took a closer look at the build plate once I actually removed the protective
00:00:43	film from the build plate I haven't had any further first layer adhesion issues