Videos - The Coin Bot

Jump to This Time	Transcription Text
00:00:00	you can see that I actually printed a little standoff here to hold the limit switch underneath this coin sorting mechanism and I got the height right that's going to it's going to ride along this rail here so that's going to work
00:00:18	out very nicely so the height is perfect but the problem with it is is that there's so much play in this wheel that if it's jig around in there it'll actually activate the switch and so you can't have a
00:00:35	positive stop in here to know exactly where the servo motor is going to be that required a little bit of work with the xacto blade I cut out those little cogs here that were holding the limit switch uh into position forwards and
00:00:44	backwards and then I could actually move the limit switch physically forward and back until I got it exactly the right position