Videos - The Coin Bot

Jump to This Time	Transcription Text
00:00:00	and now using the other end of the wire I'm going to show you the wrong way to do it using these calibrated strippers like we said before you want to make sure that it's in the right hole and you want to make sure that the
00:00:10	wire is lined up with the edge of the pliers there so you're getting the correct amount stripped you're in the right hole there and if I only squeeze this halfway you can see that the wire actually
00:00:28	strips but if I don't squee squeeze this all the way down you can see that I can't pull the wire out now and if I start to retract this I still can't pull the wire out and the stripper portion here will actually
00:00:44	mash up against the wire in there and if that's stranded wire it's going to make a mess of that end so you want to do a full stroke in the right hole that sounds terrible but you get the idea